2021.10.0: Z-Wave S2 support, Tuya, secure ESPHome and 400 new icons

The following template filters and functions will now log a warning instead of
silently returning the input if the input is invalid and no default value is specified:

• acos
• as_timestamp
• asin
• atan
• atan2
• cos
• float
• log
• multiply
• round
• sin
• sqrt
• strptime
• tan
• timestamp_custom
• timestamp_local
• timestamp_utc

The float filter will now log a warning instead of silently returning 0 if
the input is invalid and no default value is specified.

In Home Assistant Core 2021.12 the template will fail to render if no default
value is specified. You can specify a default value by passing to the filter like
this: {{ "abc" | float(default=0) }}.

(@emontnemery – #56453)

The Material Design Icons have been upgraded to v6, which brings in around
400 new icons and removes and renames some others.

The removed and renamed icons will keep working for this and the next release,
Home Assistant will write a warning to the logs in case
you are using one of the removed or renamed icons.

The following icons have been removed:

• adobe-acrobat
• adobe
• amazon-alexa
• amazon
• android-auto
• android-debug-bridge
• bandcamp
• battlenet
• blogger
• buffer
• cash-usd-outline
• cash-usd
• cellphone-android (alternative: cellphone)
• cellphone-iphone (alternative: cellphone)
• concourse-ci
• currency-usd-circle
• currency-usd-circle-outline
• do-not-disturb-off (alternative: minus-circle-off)
• do-not-disturb (alternative: minus-circle)
• douban
• file-pdf (alternative: file-pdf-box)
• file-pdf-outline (alternative: file-pdf-box)
• file-pdf-box-outline (alternative: file-pdf-box)
• google-photos
• home-currency-usd
• laptop-chromebook (alternative: laptop)
• laptop-mac (alternative: laptop)
• laptop-windows (alternative: laptop)
• microsoft-edge-legacy
• microsoft-yammer
• pdf-box (alternative: file-pdf-box)
• plus-one (alternative: numeric-positive-1)
• poll-box (alternative: chart-box)
• poll-box-outline (alternative: chart-box-outline)
• tablet-ipad (alternative: tablet)
• telegram
• untappd
• vk
• xamarian-outline
• xing
• y-combinator

The following icons have been renamed:

• apple-airplay to cast-variant
• application to application-outline
• application-cog to application-cog-outline
• application-settings to application-settings-outline
• bolnisi-cross to cross-bolnisi
• boom-gate-up to boom-gate-arrow-up
• boom-gate-up-outline to boom-gate-arrow-up-outline
• boom-gate-down to boom-gate-arrow-down
• boom-gate-down-outline to boom-gate-arrow-down-outline
• buddhism to dharmachakra
• cellphone-erase to cellphone-remove
• celtic-cross to cross-celtic
• christianity to cross
• christianity-outline to cross-outline
• face to face-man
• face-outline to face-man-outline
• face-profile-woman to face-woman-profile
• face-shimmer to face-man-shimmer
• face-shimmer-outline to face-man-shimmer-outline
• flash-circle to lightning-bolt-circle
• floor-lamp-variant to floor-lamp-torchiere-variant
• gif to file-gif-box
• gradient to gradient-vertical
• hand to hand-front-right
• hand-left to hand-back-left
• hand-right to hand-back-right
• hinduism to om
• human-greeting to human-greeting-variant
• iframe to application-brackets
• iframe-outline to application-brackets-outline
• iframe-array to application-array
• iframe-array-outline to application-array-outline
• iframe-braces to application-braces
• iframe-braces-outline to application-braces-outline
• iframe-parentheses to application-parentheses
• iframe-parentheses-outline to application-parentheses-outline
• iframe-variable to application-variable
• iframe-variable-outline to application-variable-outline
• islam to star-crescent
• judaism to star-david
• monitor-clean to monitor-shimmer
• pharmacy to mortar-pestle-plus
• sparkles to shimmer
• teach to human-male-board
• television-clean to television-shimmer
• text-subject to text-long
• twitter-retweet to repeat-variant
• voice-off to account-voice-off

Removes the support for legacy fan speeds.

Using speeds (‘off’, ‘low’, ‘medium’ or ‘high’) for the fan platform became
deprecated with Home Assistant Core 2021.07, while preset modes and percentage
support was added.

(@jbouwh – #55174) (alexa docs)

In order to introduce the new link status binary sensor, the previous
connectivity sensor has been renamed to connection.

Please check both your Lovelace configuration and your automations to reflect this change.

(@chemelli74 – #55446) (fritz docs)

The API endpoint /api/discovery_info now only return blank values.
This endpoint is scheduled to be removed in Home Assistant Core 2022.1.

As a regular user of Home Assistant, this change should not affect you.

(@ludeeus – #56097) (api docs)

The DLNA Digital Media Renderer integration migrated to configuration via the UI. Configuring
DLNA Digital Media Renderer via YAML configuration has been deprecated and will be removed in a
future Home Assistant release.

Your existing YAML configuration is automatically imported on upgrade to this release;
and thus can be safely removed from your YAML configuration after upgrading.

(@chishm – #55267) (dlna_dmr docs)

When an iOS device wakes up it has to refresh all the A records
for each paired accessory. When there are many paired accessories
this can result in HomeKit timing out before it can refresh
all the records and declaring some accessories unavailable.

We now use the same server name for all HomeKit bridges and accessories
on a single Home Assistant instance. This allows the system to avoid
doing multiple lookups since it only needs to find one A record when
waking from sleep.

iOS devices and Home Hubs (Apple TVs / HomePods / iPads) may cache
the server name even if it expires and may require
a reboot to see the new name. If this is the case, accessories may
show unavailable when outside the home until ALL home hubs are rebooted.

(@bdraco – #55860)

The polling interval of the Honeywell Lyric integration has been decreased to
300 seconds to reduce chances of hitting API limit.

(@timmo001 – #56393) (lyric docs)

The (non-working) pressure sensor has been removed.

(@fredrike – #56934) (point docs)

The Modem Caller ID integration migrated to configuration via the UI. Configuring
Modem Caller ID via YAML configuration has been deprecated and will be removed in a
future Home Assistant release.

Your existing YAML configuration is automatically imported on upgrade to this release;
and thus can be safely removed from your YAML configuration after upgrading.

(@tkdrob – #46677) (modem_callerid docs)

The Moon entity would never have a primary moon phase state. So the state of
the moon would go from Waxing gibbous directly to Waning gibbous,
without being Full Moon in between.

Now the Moon entity will correctly have the primary moon phases: New Moon,
First Quarter, Full Moon and Third Quarter.

If you have automations relying on the state of the moon, please review them
to check if they still behave as intended.

(@stefanroelofs – #55518) (moon docs)

The NETGEAR integration migrated to configuration via the UI. Configuring
NETGEAR via YAML configuration has been deprecated and will be removed in a
future Home Assistant release.

Your existing YAML configuration is automatically imported on upgrade to this release;
and thus can be safely removed from your YAML configuration after upgrading.

(@starkillerOG – #54479) (netgear docs)

The extra attribute state is removed from all sensors, since it is already exposed as an own sensor.

If you relied on this attribute for your automations or script, you might need to adjust to this change.

(@mib1185 – #56078) (nut docs)

The OpenGarage integration has previously been migrated to configuration via the UI.
Configuring OpenGarage via YAML configuration has now been deprecated and will be
removed in a future Home Assistant release.

Your existing YAML configuration is automatically imported on upgrade to this release;
and thus can be safely removed from your YAML configuration after upgrading.

(@Danielhiversen – #56829) (opengarage docs)

The extra attribute domains_blocked is removed from all sensors, since it is already exposed as an own sensor.

If you relied on this attribute in your automations or script, you need to adjust those to match this change.

(@mib1185 – #56076) (pi_hole docs)

The previously deprecated YAML configuration of the ReCollect Waste integration has been removed.

ReCollect Waste is now configured via the UI, any existing YAML configuration has been imported
in previous releases and can now be safely removed from your YAML configuration files.

(@bachya – #55426) (recollect_waste docs)

The extra state attribute last_update has been normalized to the UTC timezone.

If you have any automation or scripts that relied on this, you might need
to adjust those to take this into account.

(@epenet – #54745) (renault docs)

sensor.charge_mode has been moved to select.charge_mode (note: unique_id is unchanged).

(@epenet – #55494) (renault docs)

The previously deprecated YAML configuration of the RFXCOM RFXtrx integration has been removed.

RFXCOM RFXtrx is now configured via the UI, any existing YAML configuration has been imported
in previous releases and can now be safely removed from your YAML configuration files.

(@elupus – #54173) (rfxtrx docs)

The previously deprecated YAML configuration of the Speedtest.net integration has been removed.

Speedtest.net is now configured via the UI, any existing YAML configuration has been imported
in previous releases and can now be safely removed from your YAML configuration files.

(@engrbm87 – #55642) (speedtestdotnet docs)

The Sure Petcare integration has previously been migrated to configuration via the UI.
Configuring Sure Petcare via YAML configuration has now been deprecated and will be
removed in a future Home Assistant release.

Your existing YAML configuration is automatically imported on upgrade to this release;
and thus can be safely removed from your YAML configuration after upgrading.

(@Danielhiversen – #56209) (surepetcare docs)

The following additional state attributes have been removed from the existing
sensors:

• available
• filesystem
• load_average
• load_idle
• load_system
• load_user
• mount
• size
• type
• used

You should update any automations and scripts that depend on these state
attribute to use the separate sensors available for these states.

(@timmo001 – #53892) (system_bridge docs)

The TP-Link Kasa Smart integration migrated to configuration via the UI. Configuring
TP-Link Kasa Smart via YAML configuration has been deprecated and will be removed in a
future Home Assistant release.

Your existing YAML configuration is automatically imported on upgrade to this release;
and thus can be safely removed from your YAML configuration after upgrading.

(@rytilahti – #56701) (tplink docs)

The previous Tuya API is no longer maintained by Tuya officially and the
new integration will be officially maintained by the Tuya Developer Team.

If you used the integration before this release, you’d need to set it up
again from scratch. To do that, remove any existing instances
from the integration dashboard. After that, use our documentation
for guidance on setting up the new integration.

The cover platform is not ready for this release but will be included later.
If you have cover devices, they will not available for control at the moment.

(@zlinoliver – #56820) (tuya docs)

UPnP/IGD integration no longer supports the local_ip configuration option.
If you still have this configured in your YAML configuration, please remove it.

(@StevenLooman – #55540) (upnp docs)

The Velbus integration migrated to configuration via the UI. Configuring
Velbus via YAML configuration has been deprecated and will be removed in a
future Home Assistant release.

The Velbus services calls will now need an interface parameter,
this is to allow support for multiple Velbus connections. If you are using
Velbus services in your automations or scripts, you may been to adjust
those to this change.

(@Cereal2nd – #54032) (velbus docs)

The model and mode attributes have been removed.
The preset_mode attribute is available in place of the mode attribute.

The device model is available in the Device info window.

(@bieniu – #55846) (xiaomi_miio docs)

The unused ruamel.yaml utility functions have been removed. They were never
in use nor documented. If your custom integration relied on ruamel.yaml being
installed, make sure it’s part of your manifest.

(@balloob – #55672)

• Use EntityDescription – renault (@epenet – #55061) (renault docs)
• Bump version to 2021.10.0dev0 (@frenck – #55227)
• Remove un-needed asserts on hass in Amecrest (@flacjacket – #55244) (amcrest docs)
• Remove option and range checks in Rituals integration (@milanmeu – #55222) (rituals_perfume_genie docs)
• Be tolerant of Wemo insight_param keys that might not exist (@esev – #55232) (wemo docs)
• Change entity_timers to be a local variable. (@janiversen – #55258) (modbus docs)
• Move AirlySensorEntityDescription to sensor platform (@bieniu – #55277) (airly docs)
• Add CONF_STATE_CLASS to sensor/__init__.py (@farmio – #54106) (mqtt docs) (knx docs) (template docs)
• Address late review for Renault integration (@epenet – #55230) (renault docs)
• Renault code quality improvements (@epenet – #55313) (renault docs)
• Adjust zha comment to be readable (@bdraco – #55330) (zha docs)
• Use EntityDescription – fritzbox (@mib1185 – #55104) (fritzbox docs)
• Add data update coordinator to the Tautulli integration (@ludeeus – #54706) (tautulli docs)
• Address late review for Xiaomi Miio number platform (@bieniu – #55275) (xiaomi_miio docs)
• Add shutdown test. (@janiversen – #55357) (modbus docs)
• Activate mypy for sonar (@janiversen – #55327) (sonarr docs)
• Add select entity to Logitech Harmony (@Aohzan – #53943) (harmony docs)
• Re-configuration possibilities for Synology DSM (@mib1185 – #53285) (synology_dsm docs)
• Solve modbus shutdown racing condition (@janiversen – #55373) (modbus docs)
• Address late fritzbox comments (@mib1185 – #55388) (fritzbox docs)
• Remove legacy discovery after_dependencies from apple_tv (@bdraco – #55390) (apple_tv docs)
• Prevent storage loads from monopolizing the executor pool (@bdraco – #55389)
• Add ll hls to stream (@uvjustin – #49608) (stream docs) (generic docs)
• Simplify calcuation of Notion binary sensor state (@bachya – #55387) (notion docs)
• OVO Energy – Post #54952 Cleanup (@timmo001 – #55393) (ovo_energy docs)
• Use EntityDescription – ambient_station (@bachya – #55366) (ambient_station docs)
• Enable basic type checking for cert_expiry (@emontnemery – #55335) (cert_expiry docs)
• Only return not return None (@Kane610 – #55423) (unifi docs)
• Add myself to Vallox codeowners (@andre-richter – #55428) (vallox docs)
• Give ReCollect Waste sensor a friendlier label (@bachya – #55427) (recollect_waste docs)
• Deprecate YAML config for ReCollect Waste (@bachya – #55426) (recollect_waste docs) (breaking-change)
• Remove byte-range addressed parts in stream (@uvjustin – #55396) (stream docs)
• System Bridge 2.5.0 – Additional Sensors (@timmo001 – #53892) (system_bridge docs) (breaking-change)
• Correct setup of system_bridge sensors (@emontnemery – #55442) (system_bridge docs)
• Use AwesomeVersion for account link service check (@ludeeus – #55449) (cloud docs)
• Refactor vallox constants (@andre-richter – #55456) (vallox docs)
• Whole-string match reqs in comment_requirement (@TheBassEngineer – #55192)
• Add long-term statistics for SimpliSafe sensors (@bachya – #55419) (simplisafe docs)
• Add -term statistics for Notion sensors (@bachya – #55414) (notion docs)
• Use EntityDescription – qnap (@cdce8p – #55410) (qnap docs)
• Add input_select and select domain support for HomeKit (@ha0y – #54760) (homekit docs)
• Fix Zone 2 and Zone 3 detection in onkyo (@Feliksas – #55471) (onkyo docs)
• Renault code quality improvements (@epenet – #55454) (renault docs)
• Add TLX daily power meter. for Growatt (@JasperPlant – #55445) (growatt_server docs)
• Allow device_id template function to use device name as input (@raman325 – #55474)
• Add support for Xiaomi Miio Air Purifier 3C (@bieniu – #55484) (xiaomi_miio docs)
• Improvements to the solarlog integration (@Ernst79 – #55405) (solarlog docs)
• Add vacation mode to manual alarm_control_panel (@mbo18 – #55340) (demo docs) (manual docs)
• Add services to Renault integration (@epenet – #54820) (renault docs)
• Mock setup in spotify tests (@ludeeus – #55515) (spotify docs)
• Fix moon phases (@stefanroelofs – #55518) (moon docs) (breaking-change)
• Add device tracker platform to Renault integration (@epenet – #54745) (renault docs) (breaking-change) (new-platform)
• Add remote server to cloud system health (@ludeeus – #55506) (cloud docs)
• Add select platform to Renault integration (@epenet – #55494) (renault docs) (breaking-change)
• Open garage, add closing and opening to state (@Danielhiversen – #55372) (opengarage docs)
• OpenGarage, change to attributes (@Danielhiversen – #55528) (opengarage docs)
• Bump cloud to 0.47.1 (@balloob – #55312) (cloud docs) (google_assistant docs)
• Use respx.mock in generic camera tests (@emontnemery – #55521) (generic docs)
• Fix zeroconf mock and use it in CI group 1’s tests (@emontnemery – #55526) (homekit_controller docs) (esphome docs) (devolo_home_control docs) (bosch_shc docs)
• Add additional test coverage for zwave_js meter sensors (@raman325 – #55465) (zwave_js docs)
• Add test fixture for unauthenticated HTTP client (@emontnemery – #55561) (almond docs)
• Use hass_client_no_auth test fixture in integrations a-g (@emontnemery – #55581)
• Use hass_client_no_auth test fixture in integrations h-p (@emontnemery – #55583)
• Use hass_client_no_auth test fixture in integrations s-x (@emontnemery – #55585)
• Prevent 3rd party lib from opening sockets in broadlink tests (@emontnemery – #55593) (broadlink docs)
• Fix url lookup in telegram_bot webhook (@ludeeus – #55587) (telegram_bot docs)
• Prevent 3rd party lib from opening sockets in epson tests (@emontnemery – #55595) (epson docs)
• Prevent 3rd party lib from opening sockets in freedompro tests (@emontnemery – #55596) (freedompro docs)
• Mock sockets in the network integration tests (@bdraco – #55594) (network docs)
• Mock out network.util.async_get_source_ip in tests (@emontnemery – #55592)
• Bump pysmappee to 0.2.27 (@bsmappee – #55257) (smappee docs)
• Prevent 3rd party lib from opening sockets in broadlink tests (@emontnemery – #55636) (broadlink docs)
• Minor cleanup in Waze travel times (@yuvalabou – #55422) (waze_travel_time docs)
• Clean holiday attributes code in Jewish calendar (@yuvalabou – #55080) (jewish_calendar docs)
• Remove wheels for alpine 3.13 (@pvizeli – #55650)
• Add upnp sensor for IP, Status, and Uptime (@ehendrix23 – #54780) (upnp docs)
• Always show state for the updater binary_sensor (@ludeeus – #55584) (updater docs)
• Use NamedTuple for color temperature range (@cdce8p – #55626) (tplink docs)
• Remove dead fritzbox code (@cdce8p – #55617) (fritzbox docs)
• Use EntityDescription – freebox (@cdce8p – #55675) (freebox docs)
• Use EntityDescription – luftdaten (@cdce8p – #55676) (luftdaten docs)
• Use EntityDescription – faa_delays (@cdce8p – #55678) (faa_delays docs)
• Use EntityDescription – econet (@cdce8p – #55680) (econet docs)
• Use EntityDescription – iperf3 (@cdce8p – #55681) (iperf3 docs)
• Fix Rachio service missing with 1st generation controllers (@brg468 – #55679) (rachio docs)
• Use EntityDescription – picnic (@cdce8p – #55682) (picnic docs)
• Use EntityDescription – discogs (@cdce8p – #55683) (discogs docs)
• Use EntityDescription – airnow (@cdce8p – #55684) (airnow docs)
• Use EntityDescription – synology_dsm (@cdce8p – #55407) (synology_dsm docs)
• System Bridge – Set device class for binary sensor (@timmo001 – #55688) (system_bridge docs)
• Update template/test_binary_sensor.py to use pytest (@janiversen – #55220) (template docs)
• Use NamedTuple for api endpoint settings (@cdce8p – #55694) (hassio docs)
• Use NamedTuple for touchline preset mode settings (@cdce8p – #55695) (touchline docs)
• Use NamedTuple for light color mode mapping (@cdce8p – #55696) (light docs)
• Type scaffold PLATFORMS (@OldShaterhan – #55699)
• Add reauth to Renault config flow (@epenet – #55547) (renault docs)
• Automation trigger info type hint improvements (@scop – #55402)
• Delay state update after switch is toggled for TP-Link HS210 device (@mib1185 – #55671) (tplink docs)
• Avoid creating sockets in homekit port available tests (@bdraco – #55668) (homekit docs)
• Drop unused ruamel (@balloob – #55672) (breaking-change)
• Update template/test_sensor.py to use pytest (@janiversen – #55288) (template docs)
• Use NamedTuple for RGBColor (@cdce8p – #55698)
• Add bluez to the devcontainer (@chemelli74 – #55469)
• Use NamedTuple for device_automation details (@cdce8p – #55697) (device_automation docs)
• Add caplog setup fixture. (@janiversen – #55714) (template docs)
• Bump motion_blinds to 0.5.5 (@starkillerOG – #55710) (motion_blinds docs)
• Remove deprecated device_state_attributes (@cdce8p – #55734) (group docs) (gogogate2 docs) (nws docs) (plaato docs) (flipr docs)
• Handle unknown preset mode in generic thermostat (@brianegge – #55588) (generic_thermostat docs)
• Tag Hue errors as format strings (@balloob – #55751) (hue docs)
• ADD: generalize regex_findall (@koying – #54584)
• Protect Huawei LTE against None ltedl/ulfreq (@scop – #54411) (huawei_lte docs)
• Optimize ZHA ZCL attribute reporting configuration (@Adminiuga – #55796) (zha docs)
• Update to denonavr version 0.10.9 (@ol-iver – #55805) (denonavr docs)
• Drop logger service fields because keys are dynamic (@balloob – #55750) (logger docs)
• ZHA: Added support for ZigBee Simple Sensor device and Binary Input c… (@wsowa – #55819) (zha docs)
• Bump envoy_reader API to 0.20.0 (@gtdiehl – #55822) (enphase_envoy docs)
• Change fix property to _attr for tradfri (@janiversen – #55691) (tradfri docs)
• Use EntityDescription – vilfo (@cdce8p – #55746) (vilfo docs)
• Use EntityDescription – awair (@cdce8p – #55747) (awair docs)
• Use EntityDescription – vultr (@cdce8p – #55789) (vultr docs)
• Use EntityDescription – meteoclimatic (@cdce8p – #55792) (meteoclimatic docs)
• Use EntityDescription – sabnzbd (@cdce8p – #55788) (sabnzbd docs)
• Use EntityDescription – aemet (@cdce8p – #55744) (aemet docs)
• Use EntityDescription – apcupsd (@cdce8p – #55790) (apcupsd docs)
• Alexa – Remove legacy speed support for fan platform (@jbouwh – #55174) (alexa docs) (breaking-change)
• Add service descriptions for supervisor backup restore services (@spacegaier – #52766) (hassio docs)
• Use EntityDescription – poolsense (@cdce8p – #55743) (poolsense docs)
• Use EntityDescription – aqualogic (@cdce8p – #55791) (aqualogic docs)
• Refactor exception handling in Vallox (@andre-richter – #55461) (vallox docs)
• Migrate emulated_hue tests from unittest to pytest (@emontnemery – #55794) (emulated_hue docs)
• Shutdown the container on abnormal signals (@agners – #55660)
• Replace zigpy-cc with zigpy-znp (@puddly – #55828) (zha docs)
• Add motion_blinds VerticalBlind and cleanup (@starkillerOG – #55774) (motion_blinds docs)
• Re-add state_class total to sensor (@emontnemery – #55103) (recorder docs) (history docs) (sensor docs)
• Make scapy imports in DHCP local (@emontnemery – #55647) (dhcp docs)
• Replace util.get_local_ip in favor of components.network.async_get_source_ip() – part 2 (@chemelli74 – #53368) (emulated_hue docs) (breaking-change)
• Use async_update_entry in config unit test instead of modifying data (@puddly – #55855) (zha docs)
• Set state class to total for Integration sensors (@emontnemery – #55872) (integration docs)
• Refactor ZHA tests (@Adminiuga – #55844) (zha docs)
• Bump hass-nabucasa 49 (@balloob – #55823) (cloud docs)
• Fix assignment of amcrest camera model (@flacjacket – #55266) (amcrest docs)
• Set state class to total for net utility_meter sensors (@emontnemery – #55877) (utility_meter docs)
• Rewrite re-auth mechanism in Synology DSM integration (@mib1185 – #54298) (synology_dsm docs)
• Add Flipr binary sensor (@cnico – #53525) (flipr docs) (new-platform)
• Add date device class (@scop – #55887)
• Address comment in integration Riemann sum PR #55875 (@dgomes – #55895) (integration docs)
• Fix upnp add_entities (@cdce8p – #55904) (upnp docs)
• Remove Trackr integration (API removed) (@FuzzyMistborn – #55917) (trackr docs) (breaking-change)
• Use EntityDescription – zoneminder (@cdce8p – #55922) (zoneminder docs)
• Use EntityDescription – incomfort (@cdce8p – #55930) (incomfort docs)
• Use EntityDescription – repetier (@cdce8p – #55926) (repetier docs)
• Use EntityDescription – konnected (@cdce8p – #55923) (konnected docs)
• deprecated unit_of_measurement (@dgomes – #55876) (integration docs)
• Bump pillow to 8.3.2 (@balloob – #55970) (qrcode docs) (tensorflow docs) (proxy docs) (seven_segments docs) (doods docs) (sighthound docs) (image docs)
• Consistent lower-case spelling of “optional” (@spacegaier – #55976) (tesla docs) (yeelight docs) (plex docs) (nightscout docs) (flick_electric docs)
• Address review comment from #55833 (@emontnemery – #55985) (google_assistant docs)
• Remove tesla integration (@alandtse – #55988) (tesla docs) (breaking-change)
• Rfxtrx drop yaml configuration (@elupus – #54173) (rfxtrx docs) (breaking-change)
• Add sum_decrease and sum_increase statistics (@emontnemery – #55850) (recorder docs) (sensor docs)
• Address post merge review of flipr binary sensor (@cnico – #55983) (flipr docs)
• Add mypy to elkm1. (@janiversen – #55964) (elkm1 docs)
• Add state class to Smart Meter Texas sensor (@adamfeldman – #55665) (smart_meter_texas docs)
• Add state belief services to bond integration (@joshs85 – #54735) (bond docs)
• Add iotawatt high-accuracy energy readout sensors (@jyavenard – #55512) (iotawatt docs)
• Add package constraint anyio>=3.3.1 (@uvjustin – #55997)
• Change character set of statistics_meta table to utf8 (@emontnemery – #56011) (recorder docs)
• Make sure character set of events, states tables is utf8 (@emontnemery – #56012) (recorder docs)
• Fix zwave_js/node_state WS API command (@raman325 – #55979) (zwave_js docs)
• Bump pysma to 0.6.6 & Fix Unit Checks (@popoviciri – #56018) (sma docs)
• Exclude @overload from coverage (@emontnemery – #56021)
• Fix state class for zwave_js energy entities (@raman325 – #56026) (zwave_js docs)
• Really change character set of statistics_meta table to utf8 (@emontnemery – #56029) (recorder docs)
• Report integrations that block startup wrap up (@bdraco – #56003)
• Add nut Watts datapoint (@wranglatang – #55491) (nut docs)
• Surepetcare, use DataUpdateCoordinator (@Danielhiversen – #55982) (surepetcare docs)
• Add support for state class total to energy cost sensor (@emontnemery – #55955) (energy docs)
• Fix compounds in sensor device class comments (@oxan – #55900) (sensor docs)
• Fix circular import of scapy in dhcp (@bdraco – #56040) (dhcp docs)
• Revert “Suppress last_reset deprecation warning for energy cost sensor (#56037)” (@emontnemery – #56042)
• Surepetcare, fix late review (@Danielhiversen – #56065) (surepetcare docs)
• Revert “Bump pillow to 8.3.2 (#55970)” (@ludeeus – #56048) (qrcode docs) (tensorflow docs) (proxy docs) (seven_segments docs) (doods docs) (sighthound docs) (image docs)
• Wait for entities when updating energy preferences (@emontnemery – #56057) (energy docs)
• Handle logout prefs update for Google/Alexa (@balloob – #56045) (cloud docs)
• Update template/test_trigger.py to use pytest (@janiversen – #55950) (template docs)
• Updated changes for aioshelly 1.0.0 (@thecode – #56083) (shelly docs)
• Handle entity creation on new added zwave_js value (@raman325 – #55987) (zwave_js docs)
• Remove unnecessary extra attribute from NUT sensors (@mib1185 – #56078) (nut docs) (breaking-change)
• Add state_class to Ecobee sensors (@bjpetit – #55996) (ecobee docs)
• Update pymelcloud to 2.5.4 (@vilppuvuorinen – #56096) (melcloud docs)
• Add view to get installation type during onboarding (@ludeeus – #56095) (onboarding docs)
• Enforce strict typing for IQVIA (@bachya – #53408) (iqvia docs)
• Bump awesomeversion to 21.8.1 (@KapJI – #55817)
• Update template/test_lock.py to use pytest (@janiversen – #56102) (template docs)
• Fix attribute access on None on startup in ESPHome (@oxan – #56105) (esphome docs)
• Bump frontend to 20210911.0 (@balloob – #56115) (frontend docs)
• Blank out discovery info (@ludeeus – #56097) (api docs) (breaking-change)
• New icon names based on MDI 6.1.95 (@kukulich – #56085) (history docs) (xiaomi_miio docs) (miflora docs)
• Add config flow support for RPC device (@thecode – #56118)
• Move parts of ssdp to async_upnp_client (@StevenLooman – #55540) (upnp docs) (sonos docs) (dlna_dmr docs) (ssdp docs) (breaking-change)
• Bump HAP-python to 4.2.1 (@bdraco – #55804) (homekit docs)
• Use the same server name for all HomeKit bridges (@bdraco – #55860) (breaking-change)
• Add audio support option to HomeKit camera UI config flow (@xdissent – #56107) (homekit docs)
• Surepetcare, upgrade library (@Danielhiversen – #56067) (surepetcare docs)
• Don’t return a unique_id if Lutron doesn’t have a UUID for the device. (@cdheiser – #56113) (lutron docs)
• Use EntityDescription – xiaomi_aqara (@cdce8p – #55931) (xiaomi_aqara docs)
• Don’t cache HomeKit camera stream source from entity (@xdissent – #56136) (homekit docs)
• Use EntityDescription – iqvia (@bachya – #55218) (iqvia docs)
• Fix listener leak in HomeKit on reload (@bdraco – #56143) (homekit docs)
• Prefer more targeted matchers in USB discovery (@bdraco – #56142) (usb docs)
• use fixtures. (@janiversen – #56130) (template docs)
• Changed wording of bond state belief feature from belief to tracked state (@joshs85 – #56147) (bond docs)
• Add zeroconf discovery to Hue (@balloob – #55358) (hue docs)
• Fix polling on online Amcrest binary sensor (@flacjacket – #56106) (amcrest docs)
• Update pymodbus fixtures to use autospec (@janiversen – #55686) (modbus docs)
• Switch velbus from python-velbus to velbusaio (@Cereal2nd – #54032) (velbus docs) (breaking-change)
• Add switch support for RPC device (@thecode – #56153) (shelly docs)
• Include end time of statistics data points in API response (@emontnemery – #56063) (recorder docs)
• Add statistics validation (@emontnemery – #56020) (recorder docs) (history docs) (sensor docs)
• Use list comprehension in onewire entity descriptions (@epenet – #56168) (onewire docs)
• Support hvac mode in melcloud climate.set_temperature service (@vilppuvuorinen – #56082) (melcloud docs)
• Add component for binary sensor groups (@brianegge – #55365) (group docs) (new-platform)
• Netgear config flow (@starkillerOG – #54479) (netgear docs) (breaking-change)
• Update icons for MDI 6 (@bramkragten – #56170) (homematic docs) (coinbase docs) (habitica docs) (icloud docs) (jewish_calendar docs) (ebox docs) (fido docs)
• Do not set assumed state for binary sensor groups (@emontnemery – #56190) (group docs)
• Use entity description and set state class to all System Monitor sensors (@mib1185 – #56140) (systemmonitor docs)
• Surepetcare config flow (@Danielhiversen – #56127) (surepetcare docs)
• Add Whirlpool integration (@abmantis – #48346) (whirlpool docs) (new-integration)
• Add description to match TubesZB Coordinators for USB Discovery (@tube0013 – #56201) (zha docs)
• Add Config Flow to Modem Caller ID integration (@tkdrob – #46677) (modem_callerid docs) (breaking-change)
• Bump up zha dependencies (@Adminiuga – #56206) (zha docs)
• Clean up Surepetcare binary sensor (@Danielhiversen – #56070) (surepetcare docs)
• Bump codecov/codecov-action from 2.0.3 to 2.1.0 (@dependabot – #56210)
• Add service to stop/restart modbus (@janiversen – #55599) (modbus docs)
• Enforce device class for gas and energy sensors used by energy dashboard (@emontnemery – #56218) (energy docs)
• Add Crownstone integration (@RicArch97 – #50677) (crownstone docs) (new-integration)
• Add long-term statistics for AirNow sensors (@bachya – #56230) (airnow docs)
• Use EntityDescription – vicare (@cdce8p – #55932) (vicare docs)
• Update template/alarm_control_panel.py to use pytest (@janiversen – #56229) (template docs)
• Add long-term statistics for RainMachine sensors (@bachya – #55418) (rainmachine docs)
• Update template/test_weather.py to use pytest (@janiversen – #56223) (template docs)
• Add long-term statistics for AirVisual sensors (@bachya – #55415) (airvisual docs)
• Add long-term statistics for Flu Near You sensors (@bachya – #55416) (flunearyou docs)
• Update template/test_fan.py to use pytest (@janiversen – #56215) (template docs)
• Bump zeroconf to 0.36.3 (@bdraco – #56233) (zeroconf docs)
• Bump aiohue to 2.6.2 (@balloob – #56234) (hue docs)
• Clean up upnp YAML config (@StevenLooman – #56200) (upnp docs)
• Adjust charging_power unit (@epenet – #56167) (renault docs)
• generic_hygrostat: enable tests (@Shulyaka – #56193)
• Activate mypy for directv (@janiversen – #55963) (directv docs)
• Deprecate Surepetcare yaml config (@Danielhiversen – #56209) (surepetcare docs) (breaking-change)
• Fix Surepetcare string reference (@Danielhiversen – #56262) (surepetcare docs)
• Bump amcrest version to 1.9.2 (@flacjacket – #56281) (amcrest docs)
• Upgrade pylast from 4.2.0 to 4.2.1 (@inverse – #56015) (lastfm docs)
• Add 5-minute statistics for sensors (@emontnemery – #56006) (recorder docs) (history docs) (sensor docs)
• Allow smaller step size for input number (@emontnemery – #56211) (input_number docs)
• Delay startup for cert_expiry to allow for self checks (@jjlawren – #56266) (cert_expiry docs)
• Fix return value of preset_mode in hive climate (@Drae – #56247) (hive docs)
• Fix Meteoalarm expired alerts (@koying – #56255) (meteoalarm docs)
• Address Switcher late review comments (@thecode – #56264) (switcher_kis docs)
• Activate mypy for gpmdp. (@janiversen – #55967) (gpmdp docs)
• Update template/test_light.py to use pytest (@janiversen – #56300) (template docs)
• Mock out zeroconf in homekit_controller tests (@emontnemery – #56307) (homekit_controller docs)
• Add unique id to amcrest sensors (@flacjacket – #55243) (amcrest docs)
• Bump zeroconf to 0.36.4 (@bdraco – #56314) (zeroconf docs)
• Prevent 3rd party lib from opening sockets in sia tests (@emontnemery – #56325) (sia docs)
• Prevent 3rd party lib from opening sockets in zeroconf tests (@emontnemery – #56324) (zeroconf docs)
• Prevent 3rd party lib from opening sockets in ping tests (@emontnemery – #56329) (ping docs)
• Prevent 3rd party lib from opening sockets in wallbox tests (@emontnemery – #56308)
• Prevent 3rd party lib from opening sockets in cloud tests (@emontnemery – #56328) (cloud docs)
• Prevent 3rd party lib from opening sockets in ps4 tests (@emontnemery – #56330) (ps4 docs)
• Prevent 3rd party lib from opening sockets in rfxtrx tests (@emontnemery – #56331) (rfxtrx docs)
• Add Shelly RPC sensor and binary sensor platforms (@thecode – #56253) (shelly docs)
• Prevent 3rd party lib from opening sockets in wilight tests (@emontnemery – #56310) (wilight docs)
• Rfxtrx device triggers and actions (@elupus – #47909) (rfxtrx docs)
• Avoid creating sockets in homekit port available tests (@emontnemery – #56342) (homekit docs)
• AutomationTriggerInfo as type in rfxtrx (@Danielhiversen – #56353) (rfxtrx docs)
• Refactor ZHA HVAC thermostat channel (@Adminiuga – #56238) (zha docs)
• Index config entries by domain (@bdraco – #56316)
• Fix netgear strings (@milanmeu – #56351) (netgear docs)
• Update template/test_init.py to use pytest (@janiversen – #56336) (template docs)
• Bump up ZHA dependencies (@Adminiuga – #56359) (zha docs)
• Strict typing for SamsungTV (@chemelli74 – #53585) (samsungtv docs)
• Standardize yeelight exception handling (@bdraco – #56362) (yeelight docs)
• Allow IntegrationNotFound when checking config in safe mode (@bdraco – #56283)
• Update amcrest version to 1.9.3 (@flacjacket – #56348) (amcrest docs)
• Modbus entity update does not occur until after scan_interval (@janiversen – #56221) (modbus docs)
• Reflect changes to pydeconz v84 (@Kane610 – #56361) (deconz docs)
• Do not reload the isy994 on ip change since there is already a reload listener (@bdraco – #54602) (isy994 docs)
• Mock out network.util.async_get_source_ip in tests (@emontnemery – #56339) (sonos docs) (default_config docs)
• Prevent 3rd party lib from opening sockets in glances tests (@emontnemery – #56345) (glances docs)
• Activate mypy. (@janiversen – #55965) (entur_public_transport docs)
• Update pylint to 2.11.1 (@cdce8p – #56364)
• Address late review of samsungtv (@chemelli74 – #56382) (samsungtv docs)
• Fix dangerous brackets (@cdce8p – #56384) (asuswrt docs) (radiotherm docs) (screenlogic docs)
• Surepetcare, service to set pet location (@Danielhiversen – #56198) (surepetcare docs)
• Add Shiba Inu coin to coinbase (@DrToxic – #56304) (coinbase docs)
• Fix creating cert_expiry configs during runtime (@jjlawren – #56298) (cert_expiry docs)
• Add config flow to Switchbot (@RenierM26 – #50653) (switchbot docs) (new-platform)
• Strictly type sensor.py (@janiversen – #56388) (tradfri docs)
• Strictly type binary_sensor.py. (@janiversen – #56376) (modbus docs)
• deCONZ use siren platform (@Kane610 – #56397) (deconz docs)
• Use hass_client_no_auth test fixture in withings tests (@emontnemery – #56337) (withings docs)
• Bump pyTibber to 0.19.1 (@Danielhiversen – #56405) (tibber docs)
• Use hass_client_no_auth test fixture in nest tests (@emontnemery – #56326) (nest docs)
• Add strict typing to tradfri init and switch (@janiversen – #56002) (tradfri docs)
• Use EntityDescription – august (@cdce8p – #56395) (august docs)
• Use assignment expressions 01 (@cdce8p – #56394)
• Increase Lyric update interval to 300 seconds (@timmo001 – #56393) (lyric docs) (breaking-change)
• Improve Surepetcare set_pet_location service (@Danielhiversen – #56401) (surepetcare docs)
• Bump zeroconf to 0.36.5 (@bdraco – #56413) (zeroconf docs)
• Prevent 3rd party lib from opening sockets in smhi tests (@emontnemery – #56335) (smhi docs)
• Prevent 3rd party lib from opening sockets in samsungtv tests (@emontnemery – #56334) (samsungtv docs)
• Remove leftover debug prints in tests (@bdraco – #56409) (zeroconf docs) (homekit docs)
• Use _attr_* for the GitHub integration (@ludeeus – #56419) (github docs)
• Use attrs in Xiaomi Miio humidifier platform (@bieniu – #56371) (xiaomi_miio docs)
• Add tests for Rituals Perfume Genie number, select and binary_sensor platforms (@milanmeu – #55224) (rituals_perfume_genie docs)
• Surepetcare, strict typing (@Danielhiversen – #56425) (surepetcare docs)
• Bump zeroconf to 0.36.6 (@bdraco – #56438) (zeroconf docs)
• restore float and not string (@dgomes – #56406) (utility_meter docs)
• Strictly type sensor.py. (@janiversen – #56377) (modbus docs)
• Add missing generic-x86-64 image (@mbo18 – #56424) (version docs)
• ESPHome Noise Transport Encryption support (@OttoWinter – #56216) (esphome docs)
• Prevent opening of sockets in onboarding tests (@emontnemery – #56443) (onboarding docs)
• Make tradfri base_class.py strictly typed (@janiversen – #56341) (tradfri docs)
• Rework Xiaomi Miio fan platform (@bieniu – #55846) (xiaomi_miio docs) (breaking-change)
• Strictly type modbus base_platform.py (@janiversen – #56343) (modbus docs)
• Prevent opening sockets in panasonic_viera tests (@emontnemery – #56441) (panasonic_viera docs)
• Improve statistics validation (@emontnemery – #56457) (recorder docs) (sensor docs)
• Use EntityDescription – flume (@cdce8p – #56433) (flume docs)
• Strictly type modbus.py. (@janiversen – #56375) (modbus docs)
• Improve yeelight stability by moving timeout handling to upstream library (@bdraco – #56432) (yeelight docs)
• Improve Shelly light application/consumption type handling (@thecode – #56461) (shelly docs)
• Strictly type tradfri light.py (@janiversen – #56389) (tradfri docs)
• Add Shelly RPC device trigger and logbook platforms (@thecode – #56428) (shelly docs)
• Remove xiaomi_aqara entity_description property (@cdce8p – #56456) (xiaomi_aqara docs)
• Fix recorder Oracle DB models (@mciupak – #55564) (recorder docs)
• Add WattTime integration (@bachya – #56149) (watttime docs) (new-integration)
• Deprecate passing template to notify (@balloob – #56069) (notify docs) (breaking-change)
• Correct Alexa scene activation (@elliotmoso – #56469) (alexa docs)
• Support unicode in SMS messages (@ocalvo – #56468) (sms docs)
• Upgrade cryptography to 3.4.8 (@pvizeli – #56481)
• Strictly type tradfri cover.py (@janiversen – #56390) (tradfri docs)
• Strictly type modbus init.py, validator.py (@janiversen – #56378) (modbus docs)
• typo (@jcgoette – #56477)
• Strictly type tradfri config_flow.py (@janiversen – #56391) (tradfri docs)
• Add cover platform to switchbot (@RenierM26 – #56414) (switchbot docs) (new-platform)
• Remove redundant aiohttp response status=200 kwargs (@scop – #56417)
• Prevent 3rd party lib from opening sockets in google_assistant tests (@emontnemery – #56346) (google_assistant docs)
• Avoid deadlock on shutdown when a task is shielded from cancelation (@bdraco – #56499)
• raise PlatformNotReady when speakers unreachable (@basnijholt – #56508) (kef docs)
• Use EntityDescription – efergy (@tkdrob – #54210) (efergy docs)
• Optimise requests to the tado servers (@niklasastrom – #56261) (tado docs)
• Add extra power meter for YouLess (@roelvanderark – #56528) (youless docs)
• Split Netatmo camera persons by home (@cgtobi – #55598) (netatmo docs)
• Convert image_processing tests to pytest (@emontnemery – #56451) (image_processing docs)
• Simplify cloud request connection handling (@balloob – #56243) (cloud docs)
• Allow camera usage with HA cloud (@cgtobi – #56533) (netatmo docs)
• ZHA channel ZCL attributes initialization (@Adminiuga – #56476) (zha docs)
• Fix flaky srp energy test (@balloob – #56536) (srp_energy docs)
• Prefer HTTPStatus over int in HA view JSON functions (@scop – #56504)
• Minor refactoring of periodic statistics (@emontnemery – #56492) (recorder docs) (sensor docs)
• Register Google assistant energy storage trait (@Sian-Lee-SA – #56520) (google_assistant docs)
• Fix validation of cost entities for energy dashboard (@emontnemery – #56219) (energy docs)
• Allow confirming local push notifications (@balloob – #54947) (websocket_api docs) (mobile_app docs)
• Bump frontend to 20210922.0 (@balloob – #56546) (frontend docs)
• Energy validation: Require last_reset attribute to be set for state_class measurement energy and cost sensors (@emontnemery – #56254) (energy docs)
• Address Crownstone review comments (@RicArch97 – #56485) (crownstone docs)
• Add comments to recorder statistics code (@emontnemery – #56545) (recorder docs)
• Update zeroconf to 0.36.7 (@bdraco – #56553) (zeroconf docs)
• Upgrade PyTurboJPEG to 1.6.1 (@frenck – #56571) (camera docs)
• Upgrade pre-commit to 2.14.1 (@frenck – #56569)
• Upgrade watchdog to 2.1.5 (@frenck – #56572) (folder_watcher docs)
• Upgrade colorlog to 6.4.1 (@frenck – #56573)
• Bump aiohomekit to 0.6.3 (@Jc2k – #56574) (homekit_controller docs)
• Upgrade black to 21.9b0 (@frenck – #56575)
• Use EntityDescription – kraken (@cdce8p – #56436) (kraken docs)
• Add long-term statistics for OpenUV sensors (@bachya – #55417) (openuv docs)
• Enable strict typing for the tautulli integration (@ludeeus – #55448) (tautulli docs)
• Use EntityDescription – solaredge_local (@cdce8p – #56434) (solaredge_local docs)
• strictly type: fan.py, light.py, switch.py. (@janiversen – #56379) (modbus docs)
• Activate mypy for Vallox (@andre-richter – #55874) (vallox docs)
• Create but disable-by-default RPM and GPM sensors (@dieselrabbit – #56549) (screenlogic docs)
• Upgrade apprise to 0.9.5.1 (@frenck – #56577)
• Use EntityDescription – fitbit (@cdce8p – #55925) (fitbit docs)
• Add date device_class to Twente Milieu sensors (@frenck – #56579) (twentemilieu docs)
• Upgrade debugpy to 1.4.3 (@frenck – #56576) (debugpy docs)
• Remove config for Speedtest.net (@engrbm87 – #55642) (speedtestdotnet docs) (breaking-change)
• Add Surepetcare entity class (@Danielhiversen – #56430) (surepetcare docs)
• Airthings (@Danielhiversen – #56578) (airthings docs) (new-integration)
• Add sensor to switchbot platform (@RenierM26 – #56416) (switchbot docs) (new-platform)
• Assume Fritz!Smarthome device as unavailable (@mib1185 – #56542) (fritzbox docs)
• Convert Nanoleaf integration to use Async library aionanoleaf (@milanmeu – #56548) (nanoleaf docs)
• Add binary_sensor to switchbot (@RenierM26 – #56415) (switchbot docs) (new-platform)
• Alexa fix Fan support and cleanup (@jbouwh – #56053) (alexa docs)
• Rework Tractive integration init (@bieniu – #55741) (tractive docs)
• Convert last_reset timestamps to UTC (@emontnemery – #56561) (sensor docs)
• Add migration for 5-minute statistics (@emontnemery – #56585) (recorder docs)
• Add device info to Surepetcare (@Danielhiversen – #56600) (surepetcare docs)
• Upgrade pytest to 6.2.5 (@frenck – #56603)
• Move efergy api to pyefergy (@tkdrob – #56594) (efergy docs)
• Bump velbus-aio to 2021.9.4 (@Cereal2nd – #56478) (velbus docs)
• Set Switchbot _attr_is_closed on init (@RenierM26 – #56611) (switchbot docs)
• update SIA package (@eavanvalkenburg – #56615) (sia docs)
• Bump goalzero to 0.2.0 (@tkdrob – #56613) (goalzero docs)
• Add ability to re-auth Notion (@bachya – #55616) (notion docs)
• Add state_class and use SensorEntityDescription for comfoconnect (@michaelarnauts – #54066) (comfoconnect docs)
• Reuse zwave_js device when replacing removed node with same node (@raman325 – #56599) (zwave_js docs)
• Bump fjäråskupan to 1.0.1 (@elupus – #56628) (fjaraskupan docs)
• Use SurePetcareEntity for surepetcare binary sensor (@Danielhiversen – #56601) (surepetcare docs)
• Upgrade pipdeptree to 2.1.0 (@frenck – #56637)
• Upgrade pyupgrade to v2.27.0 (@frenck – #56638)
• Add state_class_measurement to nws (@MatthewFlamm – #56629) (nws docs)
• Update python-smarttub to 0.0.27 (@mdz – #56626) (smarttub docs)
• Upgrade pytest-xdist to 2.4.0 (@frenck – #56606)
• Upgrade numpy to 1.21.2 (@frenck – #56640) (opencv docs) (tensorflow docs) (trend docs) (iqvia docs) (compensation docs)
• Ignore config directory symlink in development (@frenck – #56639)
• Simplify state update for Flu Near You (@bachya – #56650) (flunearyou docs)
• Fix state_class for deCONZ power sensors (@Kane610 – #56586) (deconz docs)
• Revert “Simplify state update for Flu Near You (#56650)” (@bachya – #56662) (flunearyou docs)
• Simplify native value and attributes properties for Flu Near You (@bachya – #56665) (flunearyou docs)
• Correct the device name for Airthings (@Danielhiversen – #56655) (airthings docs)
• Upgrade ciso8601 to 2.2.0 (@fabaff – #56678)
• Upgrade pre-commit to 2.15.0 (@frenck – #56677)
• Upgrade emoji to 1.5.0 (@fabaff – #56684) (mobile_app docs)
• Use EntityDescription – sht31 (@cdce8p – #56435) (sht31 docs)
• Expose the ability to move an entity/device between config entries (@bdraco – #56661)
• Avoid enabling ipv6 dual stack for zeroconf on unsupported platforms (@bdraco – #56584) (zeroconf docs)
• Ensure yeelight can be unloaded when device is offline (@bdraco – #56464) (yeelight docs)
• Upgrade voluptuous to 0.12.2 (@fabaff – #56680)
• Add support for multilevel switch CC select entities (@raman325 – #56656) (zwave_js docs)
• Implement retry and backoff strategy for requirements install (@bdraco – #56580)
• Optimize SSDP matching (@bdraco – #56622) (ssdp docs)
• Ensure sonos always gets ssdp callbacks from searches (@bdraco – #56591) (ssdp docs)
• Drop defusedxml dep from ssdp manifest (@bdraco – #56699) (ssdp docs)
• Set certifi to >=2021.5.30 (@fabaff – #56679)
• Upgrade requests to 2.26.0 (@fabaff – #56683)
• Upgrade discord.py to 1.7.3 (@fabaff – #56686) (discord docs)
• Upgrade TwitterAPI to 2.7.5 (@fabaff – #56687) (twitter docs)
• Upgrade sendgrid to 6.8.2 (@fabaff – #56688) (sendgrid docs)
• Avoid checking if a package is installed if it already failed (@bdraco – #56698)
• Bump home-assistant/builder from 2021.07.0 to 2021.09.0 (@dependabot – #56704)
• SSDP starts config flow only for alive devices (@chishm – #56551) (ssdp docs)
• Upgrade praw to 7.4.0 (@fabaff – #56682) (reddit docs)
• Add is_number template filter and function (@emontnemery – #56705)
• Upgrade sentry-sdk to 1.4.1 (@frenck – #56707)
• Simplify native value property for WattTime (@bachya – #56664) (watttime docs)
• Don’t round in energy cost sensor (@emontnemery – #56258) (energy docs)
• Remove UniFi config entry reference from device when removing last entity of said device (@Kane610 – #56501) (unifi docs)
• Improve Sonos handling of TuneIn stations (@jjlawren – #56479) (sonos docs)
• Don’t reset meter when last_reset is set to None (@emontnemery – #56609) (sensor docs)
• Add current and latest firmware info to Synology_dsm (@chemelli74 – #56460) (synology_dsm docs)
• Strictly type modbus climate.py (@janiversen – #56380) (modbus docs)
• Strictly type modbus cover.py (@janiversen – #56381) (modbus docs)
• Remove unnecessary extra attribute from Pi-hole sensors (@mib1185 – #56076) (pi_hole docs) (breaking-change)
• Use EntityDescription – tellduslive (@cdce8p – #55928) (tellduslive docs)
• Add node sensor status icons (@Mariusthvdb – #56137) (zwave_js docs)
• Add more sensor types for airthings devices (@k1rd3rf – #56706)
• Use EntityDescription – hydrawise (@cdce8p – #55924) (hydrawise docs)
• Add UPNP device connection for Sonos (@chishm – #56702) (sonos docs)
• Upgrade lupupy to 0.0.21 (@frenck – #56636) (lupusec docs)
• Minor cleanup and test coverage improvement for MQTT (@emontnemery – #55265) (mqtt docs)
• Add state_class measurements in wiffi integration (@mampfes – #54279) (wiffi docs)
• Improve migration to recorder schema version 21 (@emontnemery – #56204) (recorder docs)
• Use EntityDescription – toon (@cdce8p – #55035) (toon docs)
• Use EntityDescription – meteo_france (@cdce8p – #55677)
• Use entity attributes for vizio integration (@raman325 – #56093) (vizio docs)
• Use EntityDescription – daikin (@cdce8p – #55929) (daikin docs)
• Patch coinbase (@bastgau – #56426) (coinbase docs)
• Bump elkm1-lib to 1.0.0 (@hungnguyenm – #56703) (elkm1 docs)
• Rework TPLink integration to use python-kasa (@rytilahti – #56701) (tplink docs) (breaking-change)
• Discover Switchbot MAC in config flow (@RenierM26 – #56616) (switchbot docs)
• Config-flow for DLNA-DMR integration (@chishm – #55267) (discovery docs) (dlna_dmr docs) (breaking-change)
• Add usb discovery for tubeszb ch340B serial devices (@tube0013 – #56719) (zha docs)
• Add WS API for removing statistics for a list of statistic_ids (@emontnemery – #55078) (recorder docs) (history docs)
• Define unit_of_measurement of all utility_meter sensors on HA start (@dgomes – #56112) (utility_meter docs)
• Add WS API for updating unit_of_measurement in statistics metadata (@emontnemery – #56184) (recorder docs)
• Add dhcp support for TPLink KL60 and EP40 (@bdraco – #56726) (tplink docs)
• Add api to the network integration to get ipv4 broadcast addresses (@bdraco – #56722) (network docs)
• Amberelectric (@madpilot – #56448) (amberelectric docs) (new-integration)
• Activate fault handler (@ocalvo – #56550)
• Tweak list_statistic_ids (@emontnemery – #55845) (recorder docs) (sensor docs)
• Add support for zwave_js device actions (@raman325 – #53038) (zwave_js docs)
• Bump dessant/lock-threads from 2.1.2 to 3 (@dependabot – #56727)
• Bump WazeRouteCalculator to 0.13 (@regevbr – #56718) (waze_travel_time docs)
• Inherit Filter sensor state_class from source sensor (@dgomes – #56407) (filter docs)
• Refactor Sonos alarms and favorites updating (@jjlawren – #55529) (sonos docs)
• Add binary sensor platform to Tractive integration (@bieniu – #56635) (tractive docs) (new-platform)
• Update YouLess library for support for PVOutput firmware (@gjong – #55784) (youless docs)
• Add raid monitoring to glances (@Adi146 – #56623) (glances docs)
• Adjust lock configuration (@ludeeus – #56731)
• Add support for pedestal MIOT fans to Xiaomi Miio integration (@bieniu – #56555) (xiaomi_miio docs)
• Add network support to tplink for discovery across subnets (@bdraco – #56721) (tplink docs)
• Explictly close the TPLink SmartDevice protocol on unload (@bdraco – #56743) (tplink docs)
• Clean up Nanoleaf (@milanmeu – #56732) (nanoleaf docs)
• Add proper S2 support for adding zwave_js nodes (@raman325 – #56516) (zwave_js docs)
• Use NamedTuple for intesishome swing settings (@cdce8p – #56752) (intesishome docs)
• Use NamedTuple for esphome service metadata (@cdce8p – #56754) (esphome docs)
• Use NamedTuple for discovery service details (@cdce8p – #56751) (discovery docs)
• Use NamedTuple for xbox media type details (@cdce8p – #56753) (xbox docs)
• Provide most media metadata in DlnaDmrEntity (@chishm – #56728) (dlna_dmr docs)
• Add coverage to verify tplink unique ids (@bdraco – #56746) (tplink docs)
• Adding price spike binary sensor to the Amber electric integration (@madpilot – #56736) (amberelectric docs)
• Add zeroconf support for yeelight (@joaophi – #56758) (yeelight docs)
• Fritz honor sys option pref_disable_new_entities (@chemelli74 – #56740) (fritz docs)
• Fix cover group to handle unknown state properly (@regevbr – #56739) (group docs)
• Remove timeout for backup services (@ludeeus – #56763) (hassio docs)
• Upgrade holidays to 0.11.3 (@fabaff – #56762) (workday docs)
• Upgrade beautifulsoup4 to 4.10.0 (@fabaff – #56764) (scrape docs)
• Tweak DB migration to schema version 21 (@emontnemery – #56767) (recorder docs)
• Add missing voltage sensor in Shelly integration (@bieniu – #56773) (shelly docs)
• Fix energy validation when not tracking costs (@frenck – #56768) (energy docs)
• Import Callable from collections.abc (2) (@cdce8p – #56776)
• Set strict typing for modbus. (@janiversen – #56779)
• Import Callable from collections.abc (4) (@cdce8p – #56778)
• Import Callable from collections.abc (3) (@cdce8p – #56777)
• Import Callable from collections.abc (1) (@cdce8p – #56775)
• Add code_format to template alarm (@avee87 – #56700) (template docs)
• Optimize _get_states_with_session (@emontnemery – #56734) (recorder docs)
• Migrate Vallox to new fan entity model (@andre-richter – #56663) (vallox docs)
• Remove automatic splitting of net meters from statistics (@emontnemery – #56772) (recorder docs) (history docs) (sensor docs)
• Open garage, add config flow (@Danielhiversen – #55290) (opengarage docs)
• Add zwave to zwave_js migration (@MartinHjelmare – #56159) (zwave docs) (ozw docs) (zwave_js docs)
• Add Surepetcare locks (@Danielhiversen – #56396) (surepetcare docs) (new-platform)
• Add “Summation Delivered” Sensor for SmartEnergy metering ZHA channel (@Adminiuga – #56666) (zha docs)
• Bump aiodiscover to 1.4.4 to fix mac matching with leading 0s (@bdraco – #56791) (dhcp docs)
• Add long-term statistics for Guardian sensors (@bachya – #55413) (guardian docs)
• Warn if template functions fail and no default is specified (@emontnemery – #56453) (breaking-change)
• Plex media browser improvements (@jjlawren – #56312) (plex docs)
• Minor cleanup of recorder statistics code (@emontnemery – #55339) (recorder docs)
• Wait for yeelight internal state to change before update after on/off (@bdraco – #56795) (yeelight docs)
• Add switch platform to Tractive integration (@bieniu – #55517) (tractive docs) (new-platform)
• Use isinstance to verify class in deCONZ integration (@Kane610 – #56794) (deconz docs)
• Bump zwave-js-server-python to 0.31.1 (@raman325 – #56517) (zwave_js docs)
• Fix honeywell connection error (@rdfurman – #56757) (honeywell docs)
• Bump holidays to 0.11.3.1 (@MartinHjelmare – #56804) (workday docs)
• Fallback to state machine in statistics (@emontnemery – #56785) (sensor docs)
• Manage s2 keys in zwave_js (@MartinHjelmare – #56783) (zwave_js docs)
• Fix zwave_js config flow import step (@MartinHjelmare – #56808) (zwave_js docs)
• Get the currency from the api (@joaophi – #56806) (growatt_server docs)
• Add latest added media as Plex library sensor attribute (@jjlawren – #56235) (plex docs)
• Switch to using constants wherever possible in zwave_js (@raman325 – #56518) (zwave_js docs)
• Bump ZHA quirks module to 0.0.62 (@dmulcahey – #56809) (zha docs)
• Fix dhcp discovery matching due to deferred imports (@bdraco – #56814) (dhcp docs)
• Add device_info to Speedtestdotnet and some code cleanup (@engrbm87 – #56612) (speedtestdotnet docs)
• Use EntityDescription – smappee (@cdce8p – #56747) (smappee docs)
• Add keyboard event type to keyboard_remote (@lanrat – #56668) (keyboard_remote docs)
• Handle UpnpError exceptions when getting WAN status and external IP address (@ehendrix23 – #56744) (upnp docs)
• Fritz new binary sensor for link and firmware status + code cleanup (@chemelli74 – #55446) (fritz docs) (breaking-change)
• Add long-term statistics for Ambient PWS sensors (@bachya – #55412) (ambient_station docs)
• Use entity descriptions for sonarr (@ctalkington – #55818) (sonarr docs)
• Add some huawei_lte sensor state classifications (@scop – #55601) (huawei_lte docs)
• Change state_class so older Envoys can use Energy Dashboard (@gtdiehl – #55383) (enphase_envoy docs)
• Fix Onvif PTZ for Imou cameras (@timn – #56592) (onvif docs)
• Add DC voltage and current to Kostal inverter (@Mas2112 – #54878) (kostal_plenticore docs)
• Correct unit of measurement for qbittorrent data rate sensors (@acshef – #55758) (qbittorrent docs)
• Add Fritz!DECT 440 humidity sensor (@jloehr – #54597) (fritzbox docs)
• Tuya v2 Integration Release (@zlinoliver – #56820) (tuya docs) (breaking-change)
• Remove dead code from ESPHome light entity (@oxan – #55519) (esphome docs)
• Rename var to compliant name in August integration (@chemelli74 – #56812) (august docs)
• Fix hue turning on eWeLink switch (@logan893 – #56318) (hue docs)
• Fix OVO Energy reporting consumption as cost (@deosrc – #55856) (ovo_energy docs)
• Remove webostv service description github link (@FunctionalHacker – #53502) (webostv docs)
• Update viaggiatreno component due to API changes (@bluviolin – #56463) (viaggiatreno docs)
• Add Kraken delay after first update to avoid limit (@eifinger – #55736) (kraken docs)
• Add resolution to Amcrest camera unique id (@flacjacket – #56207) (amcrest docs)
• Adjust state class of solaredge lifetime energy sensor (@emontnemery – #56825) (solaredge docs)
• Adjust state class of growatt_server lifetime energy sensors (@emontnemery – #56826) (growatt_server docs)
• Deprecated open garage yaml config (@Danielhiversen – #56829) (opengarage docs) (breaking-change)
• Bump surepy to 0.7.2 (@Danielhiversen – #56828) (surepetcare docs)
• Service to remove clients from UniFi Controller (@Kane610 – #56717) (unifi docs)
• Update frontend to 20210930.0 (@bramkragten – #56827) (frontend docs)
• Correctly handle offline and unsupported printers during setup (@nielstron – #55894) (syncthru docs)
• Warn if total_increasing sensor has negative states (@emontnemery – #56564) (sensor docs)
• Bump Mill library (@Danielhiversen – #56833) (mill docs)
• Surepetcare reauthorize (@Danielhiversen – #56402) (surepetcare docs)
• Optimize statistics generation (@emontnemery – #56821) (recorder docs) (history docs) (sensor docs)
• Add locking state to surepetcare locks (@Danielhiversen – #56830) (surepetcare docs)
• Add strings for new zwave_js config flow keys (@raman325 – #56844) (zwave_js docs) (beta fix)
• Upgrade aionanoleaf to 0.0.2 (@milanmeu – #56845) (nanoleaf docs) (beta fix)
• Correct database migration to schema version 22 (@emontnemery – #56848) (recorder docs) (beta fix)
• Adjust state class of solarlog yield and consumption sensors (@emontnemery – #56824) (solarlog docs) (beta fix)
• Handle missing serial extended parameters in crownstone (@RicArch97 – #56864) (crownstone docs) (beta fix)
• Opengarage bug fix (@Danielhiversen – #56869) (opengarage docs) (beta fix)
• Fix check_control_message short description (@cdce8p – #56876) (bmw_connected_drive docs) (beta fix)
• Bump aioesphomeapi from 9.1.0 to 9.1.2 (@OttoWinter – #56879) (esphome docs) (beta fix)
• Fix bmw_connected_drive battery icon (@cdce8p – #56884) (bmw_connected_drive docs) (beta fix)
• Revert fritz pref_disable_new_entities handling (@chemelli74 – #56891) (fritz docs) (beta fix)
• Use native unit of measurement in deCONZ sensors (@Kane610 – #56897) (deconz docs) (beta fix)
• CLIPGenericFlag should be deCONZ sensor not binary sensor (@Kane610 – #56901) (deconz docs) (beta fix)
• Fix vicare binary sensor (@crazyfx1 – #56912) (vicare docs) (beta fix)
• Set unique id while SSDP discovery of Synology DSM (@mib1185 – #56914) (synology_dsm docs) (beta fix)
• Address beta review comments for WattTime (@bachya – #56919) (watttime docs) (beta fix)
• Bump pynws: fix unit code bug (@MatthewFlamm – #56923) (nws docs) (beta fix)
• Fix Switchbot unsupported SB types (@RenierM26 – #56928) (switchbot docs) (beta fix)
• Fix Unable to serialize to JSON error in Xiaomi Miio (@bieniu – #56929) (xiaomi_miio docs) (beta fix)
• Add DHCP support for TPLink KL430, KP115 (@bdraco – #56932) (tplink docs) (beta fix)
• Update pypoint to use v5 of backend API (@fredrike – #56934) (point docs) (breaking-change) (beta fix)
• Bump PyFlume to 0.6.5 to fix compat with new JWT (@bdraco – #56936) (flume docs) (beta fix)
• Add sleep_period to log for easier debugging (@chemelli74 – #56949) (shelly docs) (beta fix)
• Add dhcp discovery for TPLink EP10 (@bdraco – #56955) (tplink docs) (beta fix)
• Update frontend to 20211002.0 (@bramkragten – #56963) (frontend docs) (beta fix)
• Disable discovery for dlna_dmr until it is more selective (@chishm – #56950) (dlna_dmr docs) (beta fix)
• Fix Tuya v2 fan percentage (@zlinoliver – #56954) (tuya docs) (beta fix)
• Fix yeelight state when controlled outside of Home Assistant (@bdraco – #56964) (yeelight docs) (beta fix)
• Fix incorrect handling of hass.data in WattTime setup (@bachya – #56971) (watttime docs) (beta fix)
• Bump aioshelly to 1.0.2 (@thecode – #56980) (shelly docs) (beta fix)
• Fix upnp invalid key in ssdp discovery_info (@StevenLooman – #56986) (upnp docs) (beta fix)
• Bump async-upnp-client to 0.22.5 (@StevenLooman – #56989) (upnp docs) (yeelight docs) (dlna_dmr docs) (ssdp docs) (beta fix)
• Use pycarwings2.12 for Nissan Leaf integration (@filcole – #56996) (nissan_leaf docs) (beta fix)
• Round tplink energy sensors to prevent insignificant updates (@bdraco – #56999) (tplink docs) (beta fix)
• Bump yeelight to 0.7.6 (@bdraco – #57009) (yeelight docs) (beta fix)
• Ignore utility_meter restore state if state is invalid (@dgomes – #57010) (utility_meter docs) (beta fix)
• Bump pyatmo to v6.1.0 (@cgtobi – #57014) (netatmo docs) (beta fix)
• Meteofrance fix #56975 (@oncleben31 – #57016) (meteo_france docs) (beta fix)
• Fix camera tests (@cgtobi – #57020) (netatmo docs) (beta fix)
• Add DHCP support for TPLink KP400 (@bdraco – #57023) (tplink docs) (beta fix)
• Shorten album titles when browsing artist (@jjlawren – #57027) (plex docs) (beta fix)
• Evict purged states from recorder’s old_state cache (@emontnemery – #56877) (recorder docs) (beta fix)
• Fix Tuya v2 login issue (@zlinoliver – #56973) (tuya docs) (beta fix)
• Mark auth voluptuous schema fields as required (@balloob – #57003) (beta fix)
• Bump zwave-js-server-python to 0.31.2 (@raman325 – #57007) (zwave_js docs) (beta fix)
• Universal media player: consider unknown as inactive child state (@koying – #57029) (universal docs) (beta fix)
• ESPHome fix zeroconf add_listener issue (@OttoWinter – #57031) (esphome docs) (beta fix)
• Bump aioesphomeapi from 9.1.2 to 9.1.4 (@OttoWinter – #57036) (esphome docs) (beta fix)
• Prevent opening of sockets in watttime tests (@emontnemery – #57040) (watttime docs) (beta fix)
• Rewrite tuya config flow (@ludeeus – #57043) (tuya docs) (beta fix)
• Improve sensor statistics validation (@emontnemery – #56892) (sensor docs) (beta fix)
• Update esphome reconnect logic to use newer RecordUpdateListener logic (@bdraco – #57057) (esphome docs) (beta fix)
• Fix: Shelly Gen2 – filter unsupported sensors (@thecode – #57065) (shelly docs) (beta fix)
• Update frontend to 20211004.0 (@bramkragten – #57073) (frontend docs) (beta fix)
• Fix energy gas price validation (@balloob – #57075) (energy docs) (beta fix)
• Fix Growatt login invalid auth response (@indykoning – #57071) (growatt_server docs) (beta fix)
• Prevent Tuya from accidentally logging credentials in debug mode (@frenck – #57100) (tuya docs) (beta fix)
• Small code styling tweaks for Tuya (@frenck – #57102) (tuya docs) (beta fix)
• Remove Python shebang line from Tuya integration files (@frenck – #57103) (tuya docs) (beta fix)
• Bump aioesphomeapi from 9.1.4 to 9.1.5 (@OttoWinter – #57106) (esphome docs) (beta fix)
• Update Tuya code owners (@balloob – #57078) (tuya docs) (beta fix)
• Bump tuya-iot-py-sdk to 0.5.0 (@frenck – #57110) (tuya docs) (beta fix)
• Update tesla_powerwall to 0.3.11 (@jrester – #57112) (powerwall docs) (beta fix)
• Bump aiohue to 2.6.3 (@balloob – #57125) (hue docs) (beta fix)
• Fix yeelight connection when bulb stops responding to SSDP (@bdraco – #57138) (yeelight docs) (beta fix)
• Reinstate asking for country in Tuya flow (@balloob – #57142) (tuya docs) (beta fix)
• Bump zwave-js-server-python to 0.31.3 (@raman325 – #57143) (zwave_js docs) (beta fix)
• Updated amberelectic attributes to reflect unit change to $/kWh (@mindmelting – #57109) (amberelectric docs) (beta fix)
• Fix Fritz shutdown race condition (@chemelli74 – #57148) (fritz docs) (beta fix)
• Fix SamsungTV shutdown race condition (@chemelli74 – #57149) (samsungtv docs) (beta fix)
• Guard upnp create device (@balloob – #57156) (upnp docs) (beta fix)
• Bump netdisco to 3.0.0 (@balloob – #56903) (discovery docs) (beta fix)